SR 15° Angle Adapter for Canyon GEAR GROOVE Aero Extension
Product information "SR 15° Angle Adapter for Canyon GEAR GROOVE Aero Extension"
Take control of your aero position: the 15° angle adjustment for the Canyon GEAR GROOVE aero extension precisely adjusts the angle of your triathlon aerobars – for a more aerodynamic, more comfortable arm and upper-body position in time trials and triathlon on your Canyon Aeroad.
15° Angle Adjustment for Canyon GEAR GROOVE – Technical Details
- +15° angle adjustment for individual positioning of your aerobars
- Precise fit for the Canyon GEAR GROOVE aero extension on the Canyon Aeroad
- Material: high-strength 7075 aluminium, CNC-machined
- Black anodised surface – corrosion-resistant and scratch-resistant
- Stack: 17.3 mm | Reach: 13.6 mm
- The original Canyon spacers can still be used – depending on the combination, alternative screw lengths may be required
- Included: 1× adapter incl. mounting hardware and instructions
A better aero position on the Canyon Aeroad
The CNC-machined adapter changes the angle of the aero extension by a controlled 15°, allowing a finer adjustment of your arm and upper-body position – for less drag and more comfort over long distances. The black anodised finish blends seamlessly into the look of your Canyon Aeroad.
Mounted in minutes
Plug and play: the adapter mounts without any modification to the frame; mounting hardware and instructions are included. You can keep using the original Canyon spacers – depending on the spacer combination, alternative screw lengths may be required.
Care advice for intense training sessions
Training really hard? During intense sessions, try to keep sweat off your cockpit and components as much as possible. The salt it contains attacks not only steel parts and bearings over time, but also aluminium – on the angle spacers as well as on the original parts of your bike. Wipe your bike down with clean water after every sweaty session to keep all parts durable.
Frequently asked questions
Does the adapter fit my Canyon Aeroad?
Yes – the angle adjustment is designed specifically for the Canyon GEAR GROOVE aero extension.
Is mounting complicated?
No – plug and play. Mounting hardware and instructions are included, and the frame remains untouched.
Is the material corrosion-resistant?
Yes – 7075 aluminium with black anodising protects against corrosion and abrasion. After sweaty training sessions you should still give the bike a quick wipe with clean water (see care advice).
Can I keep using the original Canyon spacers?
Yes – depending on the spacer combination, you only need alternative screw lengths.
Login
2 reviews
2 September 2026 09:47
튼튼하게 알루미늄으로 만들어졌습니다.
다만 흠을 잡자면, 볼트 나사선 가이드 홈이 캐니언처럼 나 있지 않습니다. 남은 스페이서를 다 끼기에는 좀 짧습니다.
9 July 2026 16:19
Top Qualität
Gute Verarbeitung Eine kleine Anwendungsbeschreibung könnte nützlich sei.
Dazu passt
Want to attach a GoPro or light to the hoods of your Canyon Gear Groove Aero Extension? No problem with our specially developed mount.While other products, often manufactured using PLA printing, lack break resistance and UV stability, we offer you the highest quality: Our mounts are manufactured using the high-precision SLS (Selective Laser Sintering) process, machined with an accuracy of 0.3 mm, glass bead blasted, and then painted black.The mount comes with two expanders and the necessary screws and nuts.
Want to attach a GoPro or light to the hoods of your Canyon Gear Groove Aero Extension? No problem with our specially developed mount.While other products, often manufactured using PLA printing, lack break resistance and UV stability, we offer you the highest quality: Our mounts are manufactured using the high-precision SLS (Selective Laser Sintering) process, machined with an accuracy of 0.3 mm, glass bead blasted, and then painted black.The mount comes with two expanders and the necessary screws and nuts.
Safety in two ways! Secure yourself and your bike from now on with our SR AirTag Mount for the SR Garmin Varia 515 Mount.We are big fans of the Garmin Varia 515. In our opinion, the rear light with radar function provides optimum safety for you and your bike in road traffic.In order to protect your bike off the road, we have developed an adapter that allows you to attach both your Varia and an AirTag. Simply place the AirTag in the adapter and screw it on. You can then attach it to your SR Garmin Varia Mount 515.Note: The SR Garmin Varia Mount 515 is not included in the scope of delivery, but can be ordered for numerous models here in the store. The AirTag is also not included in the scope of delivery and is not protected from water by the adapter.
Would you like to install a light or camera on your GEAR GROOVE? No problem with our adapter. The adapter is printed for you using the SLS printing process, blasted with glass beads and then painted. You get a product that is significantly more resilient than comparable products printed with cheap PLA. The holder has four possible screw points. This means you can easily combine it with a Garmin or Wahoo computer.The Canyon GEAR GROOVE is not included in the scope of delivery.
Do you want to ride your Canyon Aeroad with a single-speed drivetrain? Then you'll need a cover for the derailleur socket to prevent dirt and moisture from entering the frame. The cover cap comes with two matching M4 stainless steel countersunk screws. The total weight is 2.5g.
Say goodbye to shaky rear lights! Our specially engineered Garmin Varia RCT715/716 mount for aero seatposts is the solution you have been waiting for: it holds your radar light securely and integrates seamlessly into your road bike.More than 10,000 cyclists have already chosen our mounts – and expressed their satisfaction with outstanding reviews.Garmin Varia RCT715/716 mount – Technical DetailsEngineered specifically for aero seatpostsOnly 37 grams – aerodynamic and unobtrusiveMaterial: nylon PA12 – high tensile strength, wear-resistant, heat- and chemical-resistantManufactured using high-precision SLS (Selective Laser Sintering) with 0.3 mm accuracyBreak-proof and UV-stable – unlike mounts made with PLA printingBead-blasted and finished in blackThe right Garmin Varia mount for your road bikeWhether you ride a Canyon, Trek, Specialized, Bianchi or Pinarello – with almost 150 precisely fitting variants you will find the right Garmin Varia mount for your seatpost. And if your model is not listed, we will gladly build one for you.Mounting your Garmin Varia mount – done in minutesYour new Garmin Varia mount attaches easily to the seatpost from below. If you prefer not to remove your seatpost, or it is not possible – no problem: the mount can also be disassembled and fitted exactly where you need it.Please note: to mount the rear light, a part of the original Garmin mount must be attached to our mount. This part is not included.Frequently asked questions about the Garmin Varia RCT715/716 mountIs the Garmin Varia RCT715/716 rear light included?No, you receive the mount – the rear light itself is not included. Please also note: mounting requires a part of the original Garmin mount, which is not included either.Does the mount fit my bike?Simply select your bike model or seatpost as a variant. If your model is not listed, we will custom-make the right mount for you.What material is the Garmin Varia mount made of?The mount is SLS-printed from nylon PA12. The material is break-proof, wear-resistant, UV-stable as well as heat- and chemical-resistant – ideal for year-round riding.
Say goodbye to shaky rear lights! Our specially engineered Garmin Varia RTL515/516 mount for aero seatposts is the solution you have been waiting for: it holds your radar light securely and integrates seamlessly into your road bike.More than 10,000 cyclists have already chosen our mounts – and expressed their satisfaction with outstanding reviews.Garmin Varia RTL515/516 mount – Technical DetailsEngineered specifically for aero seatpostsOnly 37 grams – aerodynamic and unobtrusiveMaterial: nylon PA12 – high tensile strength, wear-resistant, heat- and chemical-resistantManufactured using high-precision SLS (Selective Laser Sintering) with 0.3 mm accuracyBreak-proof and UV-stable – unlike mounts made with PLA printingBead-blasted and finished in blackDelivered pre-assembledThe right Garmin Varia mount for your road bikeWhether you ride a Canyon, Trek, Specialized, Bianchi or Pinarello – with almost 200 precisely fitting variants you will find the right Garmin Varia mount for your seatpost. And if your model is not listed, we will gladly build one for you.Mounting your Garmin Varia mount – done in minutesYour new Garmin Varia mount arrives pre-assembled and attaches easily to the seatpost from below. If you prefer not to remove your seatpost, or it is not possible – no problem: the mount can also be disassembled and fitted exactly where you need it.Frequently asked questions about the Garmin Varia RTL515/516 mountIs the Garmin Varia RTL515/516 rear light included?No, you receive the mount – the rear light itself is not included.Does the mount fit my bike?Simply select your bike model or seatpost as a variant. If your model is not listed, we will custom-make the right mount for you.What material is the Garmin Varia mount made of?The mount is SLS-printed from nylon PA12. The material is break-proof, wear-resistant, UV-stable as well as heat- and chemical-resistant – ideal for year-round riding.
You are searching for a solution to mount all your equipment to your Canyon GEAR GROOVE Aero Extension? Then you've found exactly the right product.Mount your bike computer and front light to our mount at the same time and be safer and more aerodynamic than ever before!Note: The Canyon GEAR GROOVE Aero extension is not part of the scope of delivery. Adaptions for Garmin- and Wahoo bike computers are part of the product.