Darimo Seatposts

Du suchst eine ultraleichte Aero-Sattelstütze für dein Bike? Hier haben Sie die Lösung. Jetzt kannst du die Original-Sattelstütze austauschen und Gewicht an einer der wichtigsten Stellen des Fahrrads reduzieren.Bitte beachte, dass die Sattesltütze nach deiner Bestellung exklusiv für dich gefertigt wird. Ein Umtausch oder Stornierung ist daher ausgeschlossen. Aufgrund der hohen Nachfrage musst du aktuell mit 16 Wochen Produktionszeit rechnen.Das Gewicht der Sattelstütze beträgt ca. 95 Gramm in 350mm Länge für die gerade Version. Die Sattelstütze besteht aus Carbonfasern mit bidirektionalem und unidirektionalem Gewebe und einem asymmetrischen Laminat, um die optimale Kombination aus minimalem Gewicht und maximaler Widerstandsfähigkeit zu erreichen. Jede Sattelstütze wird von Hand laminiert, um ein rekordverdächtiges Gewicht zu erreichen, wobei die Festigkeit und Ihre Sicherheit berücksichtigt werden. Um dies zu erreichen, gibt es an jedem Punkt der Sattelstütze eine unterschiedliche Anzahl und Anordnung von Kohlefaserschichten. Die Anordnung der Schichten wird nach einer Finite-Elemente-Analyse und zerstörenden Tests ermittelt. Das völlig neue, nach unten gerichtete Klemmsystem für die geraden Versionen besteht aus zwei ultraleichten Dyneema®-Schlaufen. Das bedeutet eine erhebliche Gewichtsreduzierung am Kopf der Sattelstütze / des Klemmsystems. Dieses System ist für alle Arten von Schienen geeignet, auch für Carbonschienen 7x9 mm. Ausführung: Bright, Matte, Bidirektional (3k) oder unidirektional (+4g), anpassbare Logo Farben. 250 mm - ca 62 g300 mm - ca 71g350 mm - ca 80g400 mm - ca 89g Gewichtsbeschränkung: Die Darimo Sattelstütze ist sicher und hat die Standard ISO 4210-2 Tests bestanden, jedoch wird sie nicht für mehr als 90 kg empfohlen.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.

Looking for ultralight aero seatpost for your top end bike? Here you have the solution. Now you can change your original seatpost and remove weight in one of the most important places of the bike. The weight removed in seatpost and saddle is very important as it’s far from the ground, then the pendulum effect is reduced drastically. Please note that the seat post will be manufactured exclusively for you after your order. An exchange or cancellation is therefore excluded. Due to high demand, you currently have to expect 16 weeks of production time. The weight for this kind of not round seatpost is around 95 grams in 350mm lenght for the straight version, just ask. The main post is made of carbon fiber using bidirectional and unidirectional fabrics with an studied asymmetrical laminate to achieve the optimum combination of minimum weight and maximum of resistance. Each seatpost is laminated by hand to achieve a record weight keeping in mind the strength and your safety. To do this, at each point of the seatpost there are a different numbers and arrangements of carbon fiber layers. The layers arrangement is obtained after finite elements analysis and destructive testing. The totally new dessigned clamping system for the straight versions is made with two ultralight Dyneema® loops. That makes a very important weight reduction on the head of the seatpost / clamping system. This system is good for all kind of rails, including carbon rails 7x9mm. Finishing: Bright – Mat, Bidirectional (3k) or unidirectional (+4g), customizable colors. Riders weight limit: The Darimo Seatpost is safe and has passed the standard ISO 4210-2 tests, however it is not recommended for more than 90 kg. If you weight more than 90 kg we will reinforce it for you.